Mech- tutor
having dificulty in mechanical engineering this is the place you should look for.. This blog is made to help mechanical engineering enthusiasts and graduates.
19 September 2013
Applying brain is only solution
Must Read...
A father left 17 camels as an asset for his three sons.
When the father passed away, his sons opened up the will. The Will of the father stated that the eldest son should get half of 17 camels while the middle son should be given 1/3rd (one-third).The youngest son should be given 1/9th (one-ninth) of the 17 camels.
As it is not possible to divide 17 into half or 17 by 3 or 17 by 9, three sons started to fight with each other.
So, the three sons decided to go to a wise man. The wise man listened patiently about the Will. The wise man, after giving this thought, brought one camel of his own and added the same to 17. That increased the total to 18 camels. Now, he started reading the deceased father’s will. Half of 18 = 9. So he gave the eldest son 9 camels 1/3rd of 18 = 6. So he gave the middle son 6 camels 1/9th of 18 = 2. So he gave the youngest son 2 camels. Now add this up: 9 plus 6 plus 2 is 17 and this leaves one camel, which the wise man took back.
Moral :The attitude of negotiation and problem solving is to find the 18th camel i.e. the common ground. Once a person is able to find the common ground, the issue is resolved. It is difficult at However, to reach a solution, the first step is to believe that there is a solution. If we think that there is no solution, we won’t be able to reach any!
A father left 17 camels as an asset for his three sons.
When the father passed away, his sons opened up the will. The Will of the father stated that the eldest son should get half of 17 camels while the middle son should be given 1/3rd (one-third).The youngest son should be given 1/9th (one-ninth) of the 17 camels.
As it is not possible to divide 17 into half or 17 by 3 or 17 by 9, three sons started to fight with each other.
So, the three sons decided to go to a wise man. The wise man listened patiently about the Will. The wise man, after giving this thought, brought one camel of his own and added the same to 17. That increased the total to 18 camels. Now, he started reading the deceased father’s will. Half of 18 = 9. So he gave the eldest son 9 camels 1/3rd of 18 = 6. So he gave the middle son 6 camels 1/9th of 18 = 2. So he gave the youngest son 2 camels. Now add this up: 9 plus 6 plus 2 is 17 and this leaves one camel, which the wise man took back.
Moral :The attitude of negotiation and problem solving is to find the 18th camel i.e. the common ground. Once a person is able to find the common ground, the issue is resolved. It is difficult at However, to reach a solution, the first step is to believe that there is a solution. If we think that there is no solution, we won’t be able to reach any!
13 September 2013
YMCA UNIVERSITY OF SCIENCE & TECHNOLOGY,FARIDABAD
mEchneXt
QUIZ
Correct answer +3 wrong
answer -1.Avoid cutting Time
: 20 min
Double answers will not be
counted . avoid unfair means
1. The
number 65,000 expressed in scientific notation as a number between 1 and 10 times a
power of ten is..??
a)
0.65 × 104 b) 6.5 × 104 c) 65 × 104 d)
650 × 103
2. The number of millivolts in 0.06
kilovolts is..??
a) 600 V b)
6,000 mV c) 60,000 mV d) 600,000 mV
3. PSLV stands for??
a)
polarized sky lancer vehicle
b) polar
satellite launch vehicle
c)
piezo-static lancer vehicle
d) public
street loco vehicle
4. The angle of inclination of a vehicle
when moving along a circular path __________ upon its mass.
a) depends on mass of
object b) depends on velocity of object
c) independent d) none
5. The function of an alternator in an automobile is to
a) supply electric power
b) convert mechanical energy into electrical energy
c)
continually recharge the battery
d) partly convert engine power into electric power
6. A cycle consisting of one constant
pressure, one constant volume and two isentropic processes is known as
a)
Carnot cycle
b) Stirling cycle
c) Otto cycle
d)
Diesel cycle
7. Recent PSLV launched by ISRO
a) GSAT-5
b) GSAT-12
c) GSAT-
14
d) GSAT-10
8. Q’s mother is sister of P and daughter of M. S is
daughter of P and sister of T. how is M related to T?
a) grandmother b) father
c) mother d) grandfather or
grandmother
9. Percentage of carbon in medium carbon steel
a)0.3 to
.7 % b) 0.05 to 0.15% c)0.15 to 0.2 % d) 0.7 to 1.5 %
10. The second law of thermodynamics tells us about which of
the following thermodynamic quantity?
a) entropy b)
internal energy c) gibb’s free energy d) work
11. Which of the following is used to measure discharge in
an open channel?
a) orifices b)
venturimeters c) nozzles d) notches
12. Bernoulli’s theorem is based on?
a) principle of conservation of momentum b) principle of conservation of energy
c) principle of
conservation of mass d) equation
of continuity
13. Maximum KE of a photoelectron emitted from the surface
is dependent on
a) intensity of incident radiation b)potential of collector electrode
c)frequency of incident radiation d)the angle of incidence on radiation of
surface
14.which of the following statement is wrong ?
a) plaster of paris is made from dolomite, bauxite and
limestone
b) Highest temperature is represented by red colour
c) In ball bearing grease lubrication acts as boundary layer
lubrication
d) diesel is always the most most efficient fuel for an
automobile
15 choose the
correct synonym for PROLIFIC
a)
scarce
b) abundant c) beseech d) crave
16.if a gas is said to be at standard temperature and
pressure , it means
a) temp is 15°C (288K) and pressure is 760mm of Hg
b) temp is 0°C (273K) and pressure is 760 mm of Hg
c) temp is 25°C (298K) and pressure is 760 mm of Hg
d) temp is 0°C (273K) and pressure is 76mm of Hg
17. 3, 7, 6, 5, 9, 3,
12, 1, 15, (....)
a) 18 b)
13 c) -1
d) 3
18. If the resultant of two equal forces has the same
magnitude as either of the forces, then the angle between the two forces is
a) 30° b) 60° c)
90° d) 120°
19. the choke is
closed when the engine is
a) accelerating
b) hot c) cold d) idling
20. paraffins are
in general represented by
a) CnH2n+2 b) CnH2n c) Cn Hn
d) CnH2n-6
21. If N is the fan speed, then power of a fan is directly
proportional to
a) N b) N2
c) N3 d) N4
22. In a
refrigerating machine, heat rejected is ______ heat absorbed
a) equal to b) less then
c) greater than d) can’t
be determined
23.An ordinary passenger aircraft requires a cooling system
of capacity
a) 2TR b) 8TR c) 10TR
d) 12 TR
24. purpose of chuck in lathe is
a) to hold the tool b)
to hold the job c) to control the
rpm d ) to control the depth of cut
25 . Body of lathe machine is made of
a)
mild steel b) high carbon steel d) high speed steel d)cast iron
26. what are MEMS?
a)micro electromechanical systems b) memory material systems
c) mechatronic eraseable memory systems d ) mechanical
measuring systems
27. strictest emission norms are initiated in the world
first in
a) London b) New delhi c) Tokyo d) California
28. manometers are used to measure
a) pressure b) velocity c) discharge d)area
29. dimensions of modulus of elasticity
a)ML2T-1 b) ML-1T-1 c) ML-1T-2
d)MLT-2
30. INDIA’s first nuclear powered submarine
a) INS shikra b) INS chakra c) INS bhoomi d) INS arihant
07 August 2013
FILM ANTENNAS FOR AERODYNAMIC TRUCKS
In a partnership with Freightliner, Hirschmann Car Communication Inc. created a film antenna as part of an efficiency concept to make trucks more environmentally friendly and easier to maintain. The film antenna is integrated in the tractor body, making damage to the system impossible during operation, according to the electronics supplier; currently 20% of trucks’ conventional rod antennas require replacement within a year. The film antenna reportedly offers the best transmission and reception quality for CB radio, AM/FM stations, and weather information radio channels.
The collaboration between Freightliner and Hirschmann began five years ago with work on Freightliner’s aerodynamically optimized Innovation Truck in 2009. The concept led to the development of the Cascadia Evolution, which launched in January 2013. Vice President of Sales and Marketing for Hirschmann, Oliver Neil said of the partnership, “Large trucks in North America used to have many bulky antennas on the roof, fenders, and mirrors. We now offer a system that enables our customer to develop the aerodynamic design without having to worry about the antennas. It is one of the first innovative components of the concept vehicle that went into series production.
06 August 2013
Master's in turbocharging
WANT A MASTER'S IN TURBOCHARGING??
BorgWarner is working with the University of Huddersfield in the U.K. to establish a master's degree program in turbocharging engineering. The news came May 15 in a BorgWarner announcement outlining several developments in the U.K. (see below). Since 2011, BorgWarner has been collaborating with the University of Huddersfield on a Knowledge Transfer Partnership to research improvements in materials for turbocharger housings. The master's program would address commercial-vehicle and passenger-car applications. In related developments, BorgWarner will supply turbocharging technologies for JaguarLandRover's new family of four-cylinder gasoline and diesel engines that are slated to launch in 2015. To support the automaker's new Engine Manufacturing Centre near Wolverhampton, BorgWarner plans to expand on its existing production lines and build a new engineering center in Bradford. The supplier has produced turbocharging systems for several commercial engine makers in Bradford for almost 35 years; the new line will expand its turbocharger offerings to passenger cars.
BorgWarner is working with the University of Huddersfield in the U.K. to establish a master's degree program in turbocharging engineering. The news came May 15 in a BorgWarner announcement outlining several developments in the U.K. (see below). Since 2011, BorgWarner has been collaborating with the University of Huddersfield on a Knowledge Transfer Partnership to research improvements in materials for turbocharger housings. The master's program would address commercial-vehicle and passenger-car applications. In related developments, BorgWarner will supply turbocharging technologies for JaguarLandRover's new family of four-cylinder gasoline and diesel engines that are slated to launch in 2015. To support the automaker's new Engine Manufacturing Centre near Wolverhampton, BorgWarner plans to expand on its existing production lines and build a new engineering center in Bradford. The supplier has produced turbocharging systems for several commercial engine makers in Bradford for almost 35 years; the new line will expand its turbocharger offerings to passenger cars.
Labels:
btech,
mechnanical,
technical interview questions,
ymcaust
catia or solidworks
Q. I am really confused what should i do SOLIDWORKS OR CATIA?
I AM FREE AT WEEKEND, SATURDAY AND SUNDAY, KINDLY SUGGEST SOMETHING THAT SHOULD I DO IN THESE WEEKENDS.
Ans. Hello,
Out of Solidworks and CATIA, we would recommend you to learn CATIA. This is because,
1. CATIA is a multi-platform software that can be used in three domains namely CAD, CAE and CAM. Whereas Solidworks is a single-platform software used for CAD only.
2. CATIA is preferred for working by most companies over Solidworks.
3. CATIA is a little difficult to learn and requires professional help in order to start working on this platform. Solidworks can easily be mastered without any help if you have a proficiency in CATIA.
I AM FREE AT WEEKEND, SATURDAY AND SUNDAY, KINDLY SUGGEST SOMETHING THAT SHOULD I DO IN THESE WEEKENDS.
Ans. Hello,
Out of Solidworks and CATIA, we would recommend you to learn CATIA. This is because,
1. CATIA is a multi-platform software that can be used in three domains namely CAD, CAE and CAM. Whereas Solidworks is a single-platform software used for CAD only.
2. CATIA is preferred for working by most companies over Solidworks.
3. CATIA is a little difficult to learn and requires professional help in order to start working on this platform. Solidworks can easily be mastered without any help if you have a proficiency in CATIA.
05 August 2013
Definition of a Fluid.
A fluid is a substance that deforms continuously when subjected to a shear stress, no matter how small that shear stress may be. A shear force is the force component tangent to a surface, and this force divided by the area of the surface is the average shear stress over the area. Shear stress at a point is the limiting value of shear force to area as the area is reduced to the point.
Subscribe to:
Posts (Atom)